http://splicerite.com Wed, 11 Aug 2010 17:20:35 +0000 http://backend.userland.com/rss092 en New blue color tape with better adhesion across all ranges of carrier tape and external conditions. Can be used with either paper or plastic tape, formed or punched pockets tape from 8 - 44mm in width.   PART NUMBER DESCRIPTION DIMENSIONS QUANTITY SR.0108.3B  SMD Super Double Splice Tape - 8mm Blue w/dimples and edge guide Used with 8mm carrier tapes Box ... http://splicerite.com/?p=22 Can be used with either paper or plastic tape, punched or formed pockets, from 8-24mm in width   PART NUMBER DESCRIPTION DIMENSIONS QUANTITY SR.0208.4 SMD Single Splice Tape - 8mm Yellow - 4.8mm wide x 45mm length   Used with 8mm carrier tapes  4 strips/card 4000 strips/box   SR.0212.4 SMD Single Splice Tape - 12mm Yellow - 6mm wide x 45mm length   Used with 12mm ... http://splicerite.com/?p=21 Alignment can be done without tools or special fixtures using the pre-spaced dimples in the hard plastic card. Can be used with either plastic or punched tape from 8 - 24mm in width. Maintains precise pitch spacing and cover tape integrity. PART NUMBER DESCRIPTION APPLICATION QUANTITY SR.0108.1 SMD Double Splice Tape - 8mm Yellow w/outside sprocket dimples Used ... http://splicerite.com/?p=20 Splice tape can be used with either paper or plastic tape, punched or formed pockets, from 8-24mm in width. PART NUMBER DESCRIPTION APPLICATION QUANTITY SR.0208.0 SMD Single Splice Tape - 8mm Used for 8mm carrier tape Box of 1000 SR.0212.0 SMD Single Splice Tape - 12mm Used for 12mm carrier tape Box of 1000 SR.0216.0 SMD Single Splice Tape - 16mm Used for 16mm carrier ... http://splicerite.com/?p=19 An innovative design with a brass clip and single splice tape on a plastic backing. Can be used with either paper or plastic tape, punched or formed pockets, from 8-24mm width. PART NUMBER DESCRIPTION APPLICATION QUANTITY SR.0208.0 SMD Single Splice Tape - 8mm Used for 8mm carrier tape Box of 1000 SR.0212.0 SMD Single Splice Tape - 12mm Used for 12mm ... http://splicerite.com/?p=18 Cover tape extenders are used when a reel of SMD components doesn’t have a leader at the beginning of the reel. The tape extenders add an additional 508mm (20”) of tape as a leader and feed into SMT placement equipment as a piece of cover tape. These tape extenders reduce the ... http://splicerite.com/?p=17